Alan Levenson has created an analysis, showing how the City of Santa Monica is failing what they promised, nearly 5-months ago. Here is a copy:
Click on the image below for a scrollable view; the PDF file may be downloaded.
The largest failure identified by Alan is that nothing substantial has happened, despite the fact that ‘immediate’ action was repeatedly promised. But, there is another large failure, and even more at the heart of safety and health impacts: the Consent Decree package reveals City is not only aware that the runway violates FAA safety design standards, but the City and FAA are both perpetuating these violations until at least 2029!
To illustrate the first failure, see this copy of the City’s glowing press release, when they announced the Consent Decree on January 28th (note, too, no citizens had yet been shown any of the Consent Decree documents … that was days later). Immediate? Hardly. Trust is not earned by spending five months and getting nothing done.
On the second point, City officials want everyone to believe that this Consent Decree assures FAA runway safety standards will now be met, but this assertion appears to be a bald-faced lie. For example, see the graphic at page 20 of the 63-page Consent Decree package. This was an Airport Layout Plan (ALP), created in 1991. At the time, it was believed that more jets would use KSMO, so the ALP depicted two Runway Protection Zones (RPZs): the existing RPZ, and an expanded future RPZ. The dimensions of the RPZ trapezoid are based on aircraft performance, specifically speed and wingspan. The higher performing jets would require a longer and wider trapezoid. Unfortunately, City submitted a fuzzy and mostly illegible ALP to the Consent Decree package (so, only people with experience studying ALPs can recognize what is depicted).
To correct for City’s fuzzy ALP, here’s a sample RPZ from another airport, with a lot less jet traffic:
The green trapezoid delineates an RPZ at the north end of the Aurora Airport, near Portland, OR. This is a minimally-sized RPZ for an airport with just a few jets; the ends measure 500ft and 1010ft, and the trapezoid is 1700ft long. Note that there are no obstructions in the trapezoid, to comply with an FAA safety standard.
One of the key facts that emerged with the Consent Decree was this: both FAA and City of Santa Monica have knowingly allowed not just ‘a few’ houses and yards inside the RPZ, they have allowed fully developed residential neighborhoods! And it appears that this is not happening ANYWHERE ELSE in the United States! Furthermore, both FAA and City of Santa Monica are OK with perpetuating this safety risk (and the substantial health impacts) for 12 more years. Nothing has been done to mitigate risks and impacts upon residents actually living (and breathing, and sleeping) within either the smaller RPZ or the expanded RPZ. And, in the meantime, not only are jets increasing at KSMO, but FAA has even pretended to not notice, while scheduled commercial operations were being marketed online.
So, City of Santa Monica finally came up with a plan to shorten the runway. Are the RPZs now clear of homes, yards and other obstructions? No, there are still numerous homes in the shortened runway RPZ, too. Here is a current satellite image showing the problem on the northeast end of the airport:
A 1,700ft circle (the RPZ length used for lesser airports) has been added. The image indicates that dozens of homes (west of Westgate Ave and north of National Boulevard) remain within the new proposed RPZ.
And this does not even reflect the pollution impacts and safety risks that remain to the east of Westgate Ave, especially for the higher performance air charter flights laden with more fuel.
Clearly, Rick Cole and Ted Winterer at the City of Santa Monica need to show us graphically, and in the clearest terms:
- precisely where are the RPZ boundaries?
- are the dimensions appropriate to the size and scale of commercially operating aircraft at KSMO?
- and, can you confirm that no houses are within the KSMO RPZs?